manualshive.com logo in svg

Siemens SIMOTION SCOUT, Configuration Manual

Siemens SIMOTION SCOUT offers a comprehensive Configuration Manual, guiding users through the setup process. This detailed manual is readily available for free download from our website, providing clear instructions and enabling seamless integration of this advanced automation product into your system. Get your manual now at manualshive.com.

Share
Download
background image

3. Click in the Technology packages tab.
4. Activate the Device-specific option if the device library should be used. 
5. Select in the associated tables the appropriate device and the technology packages.
6. Click OK to confirm the changes.
7. Select the same library.
8. Right-click and select Save and compile in the context menu. The upgrade is completed.
9. Repeat the operations for all created libraries.

8.2.2

Changing the SIMOTION platform

Platform changes involving, for example, the following SIMOTION devices:
● SIMOTION C
● SIMOTION P
● SIMOTION D
Proceed as follows:
1. Export the SIMOTION CPU data to be replaced via the 

Expert > Save project and export object context menu.

2. Create a new SIMOTION device involving a different platform. This will be automatically 

inserted in the project navigator.

3. Insert a new SIMOTION device or several master systems and configure them.

The HW Config opens. The new station and the created master systems are already 

inserted.

4. Also open the old station in the HW Config. Switch to the old station.
5. Copy the DP slaves.
6. Switch to the new station.
7. Insert the DP slaves in the new station.
8. Check the configuration of the elements of the new station.
9. Close the HW Config.

Upgrading and project updates

8.2 Upgrading and changing platforms for a SIMOTION device

SIMOTION SCOUT

Configuration Manual, 11/2016

165

Summary of Contents for SIMOTION SCOUT





















































































































































































































































Reviews:

No comments

Related manuals for SIMOTION SCOUT

Panasonic FP2 Series Technical Manual preview
FP2 Series
Brand: Panasonic Pages: 68
Panasonic GP-KS162CUDE Operating Instruction preview
GP-KS162CUDE
Brand: Panasonic Pages: 27
Panasonic EBL512 G3 5000 Planning Instructions preview
EBL512 G3 5000
Brand: Panasonic Pages: 168
Panasonic WV-CU980 Software Update Procedure preview
WV-CU980
Brand: Panasonic Pages: 8
Panasonic AW-RP50 Manual preview
AW-RP50
Brand: Panasonic Pages: 3
Panasonic FP0H Series Operation Manual preview
FP0H Series
Brand: Panasonic Pages: 20
Panasonic AK-HRP1010G Operating Manual preview
AK-HRP1010G
Brand: Panasonic Pages: 29
Panasonic AK-HRP1005G Operation Manual preview
AK-HRP1005G
Brand: Panasonic Pages: 37
Panasonic AG-EC4G Operating Instructions Manual preview
AG-EC4G
Brand: Panasonic Pages: 9
Daikin Madoka User Manual preview
Madoka
Brand: Daikin Pages: 2
Daikin BRC7E530W8 Operation Manual preview
BRC7E530W8
Brand: Daikin Pages: 12
Daikin BRC1H81K Installation And Operation Manual preview
BRC1H81K
Brand: Daikin Pages: 12
Daikin BRC1H71W Operation Manual preview
BRC1H71W
Brand: Daikin Pages: 46
Daikin BRC1D71 Operation Manual preview
BRC1D71
Brand: Daikin Pages: 21
Daikin BRC1D517 Operation Manual preview
BRC1D517
Brand: Daikin Pages: 20
Danfoss 103E7 Installation & User'S Instructions preview
103E7
Brand: Danfoss Pages: 24
KAESER KOMPRESSOREN SIGMA CONTROL 2 User Manual preview
SIGMA CONTROL 2
Brand: KAESER KOMPRESSOREN Pages: 246
OJ Electronics EFR Series Instructions Manual preview
EFR Series
Brand: OJ Electronics Pages: 8

Brands by name

Popular brands

Load more brands