Siemens SIMOTION P320-3 Page 24 Manual Download

Page: 24 / 150

Description

2.2 SIMOTION P structure

SIMOTION P320-3 and Panel Fronts

Manual, 02/2012

2.2.3

Components

The most important components of a SIMOTION P application are listed below, along with

their function.

Distributed I/O systems (PROFINET)

Table 2- 1

Components for distributed I/O

Component

Function

SIMATIC ET 200M

Modular I/O system for control cabinet installation and high channel density.

SIMATIC ET 200S

Highly modular I/O system for control cabinet installation including motor

starters, safety technology, and individual grouping of the load groups.

SIMATIC ET 200eco

I/O system with IP67 degree of protection for machine-related, cabinet-free

applications, featuring a flexible and fast connection system in ECOFAST or

M12.

SIMATIC ET 200pro

Modular I/O system with IP65/67 degree of protection for machine-related,

cabinet-free applications, including motor starters.

Note
Please note that not all modules of the above-mentioned I/Os or I/O systems are approved

for SIMOTION. Moreover, system-related functional differences can occur when these I/O or

I/O systems are used on SIMOTION vs. on SIMATIC. For example, special process-control

functions (hot swapping, etc.) are not supported by SIMOTION for the ET 200M distributed

I/O system.
For a detailed and routinely updated list of I/O modules enabled with SIMOTION as well as

application information, visit us online at:
Siemens - Industry Automation and Drive Technologies - Service & Support

Further modules are integrated via the GSD file of the device's manufacturer.

Note
Please note that in individual cases, additional general conditions must be fulfilled.

Drive systems (via PROFINET IO)

Table 2- 2

List of typically connected drive systems

Component

function

SINAMICS S120

Servo drives, innovative single-axis and multi-axis solution

Summary of Contents for SIMOTION P320-3























































































































































Search results

Summary of Contents for SIMOTION P320-3

Reviews:

Related manuals for SIMOTION P320-3

Brands by name

Popular brands

Siemens SIMOTION P320-3, Manual

Search results

Summary of Contents for SIMOTION P320-3

Reviews:

Related manuals for SIMOTION P320-3

Brands by name

Popular brands