Siemens SIMOTION P320-3, Manual

Page: 48 / 150

Hardware description
3.3 SIMOTION P320-3 interfaces
SIMOTION P320-3 and Panel Fronts
48
Manual, 02/2012
DVI-I interface
C4
Analog Horizontal Sync (HSYNC) Analog Horizontal Sync Signal (A)
C5 Analog Ground (analog R, G, & return) (GND) Analog Ground
3.3.7 Slot for CompactFlash card
Interface assignment
Type: Slot
Table 3- 6 Slot for CompactFlash card
CompactFlash card interface
Pin no. Short designation Meaning
41 RESET# reset (output)
7 CS0# chip select 0 (output)
32 CS1# chip select 1(output)
34 IORD# I/O-Read (output)
35 IOWR# I/O-Write(output)
20, 19, 18, A0-A2 Address bit 0-2 (output)
17, 16, 15, 14, 12, 11, 10, 8 A3-A10 Address bit 3-10 (output) to ground
21, 22, 23, 2, 3, 4, 5, 6, 47, 48, 49,
27, 28, 29, 30, 31
D0-D15 data bits 0-15(in/out)
37 INTRQ Interrupt request (input)
9 OE# /ATA SEL# Enables True IDE Mode
24 IOCS16# I/O-chip select 16 (input)
39 CSEL# cable select (output)
42 IORDY I/O ready (input)
46 PDIAG# Passed diagnostic
45 DASP# drive active/slave present (not connected)
26, 25 CD1#, CD2# card detect (not connected)
33, 40 VS1#, VS2# Voltage sense (not connected)
43 DMARQ DMA Request (input)
44 DMACK# DMA Acknowledge (output)
36 WE# write enable
1, 50 GND Ground
13, 38 VCC + 5 V power