Hardware description
3.5 SIMOTION panel fronts
SIMOTION P320-3 and Panel Fronts
58
Manual, 02/2012
3.5.6
Panels interface description
All of the panels have interfaces on the front and rear sides.
Front-mounted USB interface – standard USB 2.0
The USB interface is located at the front of the panel under the rubber cap. This interface
can be used, for example, to connect an external keyboard or an external mouse.
Although additional USB devices (memory sticks, floppy drives, etc.) can be used, they can
impair real-time capability (see the note below).
Table 3- 9
USB interface assignment on the panel front – standard USB 2.0
Layout
Pin Name
Type Comments
4
GND
V
Ground for external USB interface
3
+ Data
B
Data cable
2
– Data
B
Data cable
1
VCC
V
+ 5 V (fused) for external USB interface;
Max. 100 mA; connect an external power supply for
devices with higher power ratings.
Signal type
V
Voltage
B
Bidirectional VI
Note
The user can read the effect on the system software on the "Latency" tab in the
SIMOTION P state tool. It displays there whether the installed software violates the real-time
conditions. In case of doubt, please contact your local SIEMENS sales representative.
Note
Using a distributed configuration with the Panel PC Remote Kit reduces the data rate at the
USB interface on the SIMOTION panel front.
Summary of Contents for SIMOTION P320-3
Page 14: ...Safety notes 1 2 Recycling and disposal SIMOTION P320 3 and Panel Fronts 14 Manual 02 2012 ...
Page 32: ...Description 2 4 SIMOTION panel fronts SIMOTION P320 3 and Panel Fronts 32 Manual 02 2012 ...
Page 100: ...Connecting 6 7 PROFINET strain relief SIMOTION P320 3 and Panel Fronts 100 Manual 02 2012 ...
Page 140: ...Standards and approvals A 3 Certificates SIMOTION P320 3 and Panel Fronts 140 Manual 02 2012 ...
