Siemens SIMOTION P320-3, Manual

Page: 12 / 150

Safety notes
1.1 General safety instructions
SIMOTION P320-3 and Panel Fronts
12
Manual, 02/2012
Battery
This device is equipped with a Lithium battery. Batteries may only be replaced by qualified
personnel.
CAUTION
There is the risk of an explosion if the battery is not replaced as directed. Replace the
battery only with the same type or with an equivalent type recommended by the
manufacturer. Dispose of used batteries in accordance with local regulations.
WARNING
Risk of explosion and release of harmful substances!
Therefore, do not throw lithium batteries into an open fire, do not solder or open the cell
body, do not short-circuit or reverse the polarity, do not heat to above 100 °C, dispose of
them in accordance with regulations, and protect them from direct exposure to sunlight,
humidity, and condensation.
ESD guidelines
Modules containing electrostatic sensitive devices (ESDs) can be identified by the following
label:
Strictly follow the guidelines mentioned below when handling modules which are sensitive to
ESD:
● Always discharge your body´s static electricity before handling modules that are sensitive
to ESD (for example, by touching a grounded object).
● All devices and tools must be free of static charge.
● Always pull the mains connector and disconnect the battery before installing or removing
modules which are sensitive to ESD.
● Handle modules fitted with ESDs only by their edges.
● Do not touch any connector pins or conductors on modules containing ESDs.