Siemens SIMOTION P320-3 Page 29 Manual Download

Page: 29 / 150

Description

2.4 SIMOTION panel fronts

SIMOTION P320-3 and Panel Fronts
Manual, 02/2012

2.4

SIMOTION panel fronts

2.4.1

Overview of SIMOTION panel fronts

The SIMOTION panel front is a control unit for use with SIMOTION P products. It is used in

conjunction with the SIMOTION P320-3 computing unit and is designed for highly

demanding tasks in PC-based automation applications.
The panel can be operated in a distributed configuration (separated from the computing unit)

via the Panel PC Remote Kit.

Product brief

SIMOTION panel fronts are available with various device fronts. The difference between the

variants lies in their support of operation with a membrane keyboard or operation with a

touch screen.
The keyboard and touch screen variants are available.

View

Figure 2-7

View of all SIMOTION panel fronts

Summary of Contents for SIMOTION P320-3























































































































































Search results

Summary of Contents for SIMOTION P320-3

Reviews:

Related manuals for SIMOTION P320-3

Brands by name

Popular brands

Siemens SIMOTION P320-3, Manual

Search results

Summary of Contents for SIMOTION P320-3

Reviews:

Related manuals for SIMOTION P320-3

Brands by name

Popular brands