Siemens SIMOTICS T-1FW68, Configuration Manual

Page: 30 / 194

Description of the motor
2.3 Technical features and ambient conditions
1FW68 radial segment motors
28
Configuration Manual, 08/2021, A5E51132930B AA
WARNING
Injury and material damage by not observing machinery directive 2006/42/EC
There is a risk of death, serious injury and/or material damage if machinery directive
2006/42/EC is not carefully observed.
• The products included in the scope of delivery are exclusively designed for
installation in a machine. Commissioning is prohibited until it has been fully
established that the end product conforms with machinery directive 2006/42/EC.
• Please observe all safety instructions and provide these safety instructions to the
end user.
Please take note of national and international license terms when operating direct
motors so that no patent rights are violated.
2.3 Technical features and ambient conditions
2.3.1 Directives and standards
Standards that are complied with
The motors of the type series SIMOTICS S, SIMOTICS M, SIMOTICS L, SIMOTICS T,
SIMOTICS A, called "SIMOTICS motor series" below, fulfill the requirements of the
following directives and standards:
• EN 60034-1 - Rotating electrical machines – Dimensioning and operating behavior
• EN 60204-1 - Safety of machinery – Electrical equipment of machines; general
requirements
Where applicable, the SIMOTICS motor series are in conformance with the following
parts of EN 60034:
Feature Standard
Degree of protection EN 60034-5
Cooling
1)
EN 60034-6
Type of construction EN 60034-7
Connection designations EN 60034-8
Noise levels 1) EN 60034-9
Temperature monitoring EN 60034-11
Vibration severity grades 1) EN 60034-14
1) Standard component, e.g. cannot be applied to built-in motors