Siemens SIMATIC ET 200eco, Manual

Page: 100 / 124

Technical data
6-22
ET 200eco Distributed I/O Station
A5E00158716-02
Actuator selection data
Output voltage
•
at signal 1 min. 2L+ (– 0.8 V)
Output current
•
at signal 1
Rated value
Permitted range
2 A
5 mA to 2.4 A
•
at ”0” signal (residual
current) Max. 0.5 mA
Resistive load range 12
Ω
to 4 k
Ω
Lamp load max. 10 W
Parallel connection of
two outputs
•
for load control
redundancy possible
•
for power increase No
Digital input control possible
Switching frequency
•
resistive load max. 100 Hz
•
inductive load
according to IEC
947-5-1, DC13 max. 0.5 Hz
•
lamp load max. 1 Hz
Limiting (internal) of
inductive cut–off voltage
to typically 2L+ (– 44 V)
Short–circuit protection of
outputs
•
response threshold
Yes, electronic
typically 4 A per
channel
6.8 I/O module 8 DI / 8 DO 1.3 A
(6ES7 143-3BH00-0XA0)
Properties
The I/O module 8 DI / 8 DO 1.3 A has the following features:
•
8 digital inputs
•
Input nominal voltage DC 24 V
•
suitable for switches and proximity switches (BEROs)
•
8 digital outputs
•
output current = 1,3 A per output
•
rated load voltage = 24 VDC
•
suitable for magnetic solenoid valves, DC contactors and signal lamps
Pin assignment of the DI sockets
The table below shows the pin assignment of the eight digital input and output
sockets.