Siemens SIMATIC ET 200eco, Manual

Page: 93 / 124

Technical data
6-15
ET 200eco Distributed I/O Station
A5E00158716-02
Technical data of I/O Module 8 DO 2A
Dimensions and weight
Dimensions
W
H D (mm)
60 210 28
Weight approx. 210 g
Module–specific data
Transmission rates 9.6/19.2/45.45/93.75/
187.5/500 kbps
1.5/3/6/12 Mbps
Bus protocol PROFIBUS-DP
Number of channels 8 digital outputs
Cable length
•
Unshielded max. 30m
Manufacturer ID 80DD
H
Voltages, currents, potentials
Rated voltage of the
electronic/sensor power
supply 1L+ 24 VDC
•
Reverse polarity
protection yes
Rated load voltage 2L+ 24 VDC
•
Reverse polarity
protection yes
Cumulative current of the
outputs
•
all mounting positions
up to 55 C each 4 A
1), 2)
Isolated potential
•
between channels no
•
between PROFIBUS
DP and other circuit
components yes
Permitted potential
difference
•
between different
circuits 75 VDC, 60 VAC
Isolation test voltage 500 VDC
Current load
•
on power supply 1L+
•
on load voltage supply
2L+
typically 70 mA
typically 60 mA
Power loss of the module typically 4 W
Status, interrupts, diagnostics
Status display Green LED per
channel
Interrupts no
Diagnostic functions
•
Group error display Red LED (SF)
•
Channel error display no
•
Read access to
diagnostics data possible
Actuator selection data
Output voltage
•
at signal 1 min. 2L+ (– 0.8 V)
Output current
•
at signal 1
Rated value
Permitted range
2 A
5 mA to 2.4 A
•
at ”0” signal (residual
current) Max. 0.5 mA
Resistive load range 12
Ω
to 4 k
Ω
Lamp load max. 10 W
Parallel connection of
two outputs
•
for load control
redundancy possible
•
for power increase No
Digital input control possible
Switching frequency
•
resistive load max. 100 Hz
•
inductive load
according to IEC
947-5-1, DC13 max. 0.5 Hz
•
lamp load max. 1 Hz
Limiting (internal) of
inductive cut–off voltage
to typically 2L+ (– 44 V)
Short–circuit protection of
outputs
•
response threshold
Yes, electronic
typically 4 A (per
channel)
1)
4 A cumulative current for sockets X1, X3, X5,
and X7; 4 A cumulative current for sockets X2,
X4, X6, and X8.
2)
Please note the current capacity of the cable