Siemens SIMATIC ET 200eco Manual Download Page 16

Page: 16 / 124

Product overview

1-4

ET 200eco Distributed I/O Station

A5E00158716-02

1.2

What is the ET 200eco distributed I/O station?

Definition

The ET 200eco distributed I/O station is a compact DP slave (degree of protection
IP 65, IP 66 or IP 67).

Field of application

•

Due to its rugged design and degree of protection IP 65, IP 66 or IP 67, the
ET 200eco distributed I/O station is primarily suitable for operation under harsh
industrial conditions.

•

The compact design of ET 200eco allows its use in confined areas and

•

its easy handling features ensure efficient commissioning and maintenance.

View

The ET 200eco consists of an I/O module and a terminal block. These components
are available in different versions.

ET 200eco with ECO-

FAST terminal block

ET 200eco with M12,

7/8”terminal block

Figure 1-2

View of the ET 200eco distributed I/O station

Summary of Contents for SIMATIC ET 200eco





























































































































Search results

Summary of Contents for SIMATIC ET 200eco

Reviews:

Related manuals for SIMATIC ET 200eco

Brands by name

Popular brands

Siemens SIMATIC ET 200eco, Manual

Search results

Summary of Contents for SIMATIC ET 200eco

Reviews:

Related manuals for SIMATIC ET 200eco

Brands by name

Popular brands