Siemens SIMATIC ET 200eco Manual Download Page 34

Page: 34 / 124

Wiring

3-8

ET 200eco Distributed I/O Station

A5E00158716-02

3.4.1

How to connect ET 200eco to protective earth (PE)

Properties

•

You must always connect the ET 200eco to protective earth. The I/O module is
equipped with a grounding bolt for this purpose.

•

The connection to protective earth is also required for the discharge of electrical
interference to ground and for EMC compatibility.

Requirements

Always provide a low–impedance connection to protective earth.

Tools required

•

Wire stripper

•

Crimp tool

•

Screwdriver

Accessories required

•

M5 x 10 fastening bolt and washers

•

Grounding conductor (copper braid cable), minimum conductor cross–section
4 mm

•

Cable lug

Summary of Contents for SIMATIC ET 200eco





























































































































Search results

Summary of Contents for SIMATIC ET 200eco

Reviews:

Related manuals for SIMATIC ET 200eco

Brands by name

Popular brands

Siemens SIMATIC ET 200eco, Manual

Search results

Summary of Contents for SIMATIC ET 200eco

Reviews:

Related manuals for SIMATIC ET 200eco

Brands by name

Popular brands