Siemens CLINITEK Status+, Operator'S Manual, Page: 95 / 172

CLINITEK Analyzer Operator’s Guide 95
System C
onf
iguration
2. Enter the password.
3. On the Choose Settings screen, select Remove Password .
The Set Password option displays in the Choose Settings menu.
You no longer need a password to gain access to Instrument Set
Up.
4. Select Done .
Setting up Operator and Patient Information
The operator and patient information settings provide the following
options:
• Quick Test
• Full Test
• Custom Set Up
Quick Test
When you run a Quick Test, the system runs the test and assigns a
sequential test number that displays when the results display or print.
Note You cannot enter patient and operator information with a Quick
Test.
To select a Quick Test, perform the following steps:
1. On the Select Ready screen, select Instrument Set Up .
2. On the Choose Settings screen, select Operator and Patient
Information .
3. Select Quick Test .
The system assigns a sequence number to the test but does not let
you enter patient and operator information. To enter patient and
operator information, see
Full Test ‚ page 96 and Custom Set Up ‚
page 96.
4. Select Next .
5. Select Done .