Siemens CLINITEK Status+ Operator'S Manual Download Page 162

Page: 162 / 172

162

CLINITEK Analyzer Operator’s Guide

Glossary

default setting

A value defined and preset by Siemens.

delete

A function an operator uses to remove an
object, such as test results or an authorized
operator, from the system database.

diagnostic screen

A software UI screen which enables the

operator to perform a system diagnostic test
when troubleshooting the analyzer.

disabled

The state when a software feature or
function, such as a configuration setting, is
not available.

enabled

The state when a software feature or
function, such as a configuration setting, is
available.

error

An event that prevents the analyzer from
operating as expected.

error code

A number displayed by the analyzer to
communicate the occurrence of an error to
the operator.

export

To copy setup data from the analyzer to a
removable data storage device.

Full Test

A strip or cassette test where the operator is
prompted to enter patient and operator
information.

help

Information presented to the operator to
assist them with the completion of a task or

operation.

Help screen

The screen that displays the help
information to the operator.

humidity check

Detects if the strip is exposed to humidity

and if so, displays an error message.

icon

An graphical depiction of a control in the
software UI.

import

To copy setup data from a removable data
storage device to the analyzer.

Term

Definition

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 162 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: