manualshive.com logo in svg

Siemens CLINITEK Status+, Operator'S Manual, Page: 123 / 172

Share
Download
Siemens CLINITEK Status+ Operator'S Manual Download Page 123

CLINITEK  Analyzer Operator’s Guide

123

System C

onf
iguration

To upgrade the analyzer software, perform the following steps:

1. If the CLINITEK  analyzer is on, press the on/off power 

button until the analyzer powers off.

The test table retracts.

2. Prepare the analyzer:

a. Ensure the CLINITEK  analyzer connects to external 

power and not battery power.

b. Do not power on the analyzer.
c. Turn the analyzer so that the back of the analyzer faces you.
d. Lift the printer cover.

CAUTION

Ensure you have printed or recorded the most recent patient 
results before you perform the software upgrade because the 
upgrade process deletes all patient records and all patient test 
results in the system. For more information about recall 
results, see Section 6, 

File Management

.

CAUTION

Do not use battery power when you upgrade the software. If 
you do, the software installation might fail.

CAUTION

Do not use gloves when you insert or remove the memory 
card. Using gloves can result in electrostatic damage to the 
card.
Ensure you wear gloves as required by your facility to 
perform other tasks.

Summary of Contents for CLINITEK Status+













































































































































































Reviews:

No comments