Siemens CLINITEK Status+ Operator'S Manual Download Page 121

Page: 121 / 172

CLINITEK Analyzer Operator’s Guide

121

System C

onf
iguration

Note

By default, the custom header is disabled. However, if you

enter information for the header, the system enables the custom
header printout option.

•

Select

Enter Line 1

and enter the information for the first line

of the custom header.

•

Select

Enter Line 2

and enter the information for the second

line of the custom header.

Note

Enter up to 24 alphanumeric characters for each header line.

8. Select

Next

. On the

Printer Settings Printer options 4 of 4

screen, select or clear any of the following options:

Note

To use an external printer, connect and enable the Status

connector.

•

To print to an external printer, select

External printer

Note

If you select

External

printer

, sample interference notes

print automatically.

•

To print to the internal printer, select

Internal printer

(default).

•

If you select Internal printer and want to print sample
interference notes, select

Enabled

for the

Print notes on

internal printer

option.

•

To disable printing sample interference notes, select

Disabled

9. Select

Done 3

times to return to the

Select Ready

screen.

Changing the Quality Control Settings

The Quality Control settings display but they are disabled. If you run
the CLINITEK analyzer with a CLINITEK Status connector, the
Quality Control settings are available. For instructions on how to set up
the Quality Control settings, see the

CLINITEK Status Connect System

Operator’s Guide

Restoring the Default Settings

You can restore the original settings (see

Default Settings

‚ page 85) for

the system.

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 121 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: