Siemens CLINITEK Status+ Operator'S Manual Download Page 164

Page: 164 / 172

164

CLINITEK Analyzer Operator’s Guide

Glossary

ready

The state when the analyzer is available to

perform tests.

recall

To access data such as test results stored on
the analyzer.

restore

To restore the analyzer setup to the default

settings.

required entry

A data entry box that must have data
entered into it.

sample interference

notes

Informs the user when appropriate about

test results that can be affected by
components detected in the same urine
sample.

screen

The display area that contains the controls
the operator selects when operating the
analyzer. The analyzer software UI contains
screens, prompts, messages, and other
operating information.

screen title

A text label that typically displays in the
upper left corner of a screen which serves as
a label for that screen.

Select Ready screen

The software UI screen that displays when

the system completes the startup process.
All software UI navigation begins from the
Select Ready screen.

settings

The areas of the software user interface
where you can configure the analyzer.

Settings screen

A software UI screen which enables the
operator to adjust or configure some aspect
of the analyzer.

SI units

An abbreviation for Systéme International, a
unit of measure.

software

Computer instructions that generate and
carry out commands to control the system
operation.

Term

Definition

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 164 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: