manualshive.com logo in svg

Siemens CLINITEK Status+, Operator'S Manual, Page: 83 / 172

Share
Download
Siemens CLINITEK Status+ Operator'S Manual Download Page 83

CLINITEK  Analyzer Operator’s Guide

83

File
 M

ana
g

em
ent

Note  

The QC feature is available only with a CLINITEK Status 

connector. For details, see the 

CLINITEK Status Connect System 

Operator’s Guide

.

To delete the patient test results, perform the following steps:

1. On the 

Select Ready

 screen, select 

Recall Results

.

The 

Recall Options

 screen displays.

2. Select 

Delete Records

.

The system displays a confirmation message.

3. Select 

Yes

.

CAUTION

Before you delete any test results, be sure that the loss of the 
test results is acceptable. If you did not send the test results to 
a host computer or printer, Siemens recommends that you 
perform those tasks before you delete the results. Keep in 
mind, the system erases the results from the database, and 
you can no longer recall them.

Summary of Contents for CLINITEK Status+













































































































































































Reviews:

No comments