manualshive.com logo in svg

Siemens CLINITEK Status+, Operator'S Manual, Page: 137 / 172

Share
Download
Siemens CLINITEK Status+ Operator'S Manual Download Page 137

CLINITEK  Analyzer Operator’s Guide

137

Speci

fications

Safety Standards

The CLINITEK  analyzer is classed as a Class A computing device 

in accordance with Part 15 of the FCC Rules.

Note  

This equipment has been tested and found to comply with the 

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial 
environment. The equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense.

Safety Certifications

For safety certifications information, see the Declaration of Conformity 
(DoC). Contact your local technical support provider for the DoC.

Electromagnetic Compatibility (EMC)

For electromagnetic compatibility (EMC) information, see the 
Declaration of Conformity (DoC). Contact your local technical support 
provider for the DoC.

Tables of Results

The analyzer displays and prints the test results for reagent strips and 
cassettes in the following formats:

•

English Units, Conventional

•

English Units, International (SI)

•

English Nordic Units, Nordic Plus System

Summary of Contents for CLINITEK Status+













































































































































































Reviews:

No comments