manualshive.com logo in svg

Siemens CLINITEK Status+, Operator'S Manual, Page: 2 / 172

Share
Download
Siemens CLINITEK Status+ Operator'S Manual Download Page 2

2

CLINITEK  Analyzer Operator’s Guide

© 2011 Siemens Healthcare Diagnostics Inc. All rights reserved.
No part of this operator’s guide or the products it describes may be 

reproduced by any means or in any form without prior consent in 

writing from Siemens Healthcare Diagnostics.
CLINITEK, CLINITEK Status, CLINITEK Advantus, Clinitest, Multistix, 

Multistix PRO, Uristix, and Chek-Stix are trademarks of 

Siemens Healthcare Diagnostics.
Presept and Cidex are trademarks of Johnson & Johnson.
Theracide is a trademark of Lafayette Pharmaceuticals, Inc.
Amphyl is a trademark of Linden Corporation.
Kimwipes is a trademark of Kimberly-Clark.

Origin: UK

The information in this operator’s guide was correct at the time of 

printing. However, Siemens Healthcare Diagnostics continues to 

improve products and reserves the right to change specifications, 

equipment, and maintenance procedures at any time without notice.
If the system is used in a manner differently than specified by 

Siemens Healthcare Diagnostics, the protection provided by the 

equipment may be impaired. See warning and hazard statements.

Summary of Contents for CLINITEK Status+













































































































































































Reviews:

No comments