Siemens CLINITEK Status+ Operator'S Manual Download Page 21

Page: 21 / 172

CLINITEK Analyzer Operator’s Guide

Introduction

Note

If you run a CLINITEK analyzer with a CLINITEK Status

connector, you can alternatively insert a memory stick into the USB
port on the back of the Status connector.

Software Overview

The CLINITEK analyzer user interface consists of a touch screen
with an onscreen alphanumeric keyboard.

Touch Screen

Use the

Select Ready

screen to configure the analyzer, run tests, recall

results, and navigate to any point in the software (see

Figure 1-7

The

Select Ready

screen contains the following elements:

•

Title bar

Contains the current screen name, date, and time.

•

Selection area

Includes Instrument Set Up, Recall Results, Cassette

Test, and Strip Test.

For a complete list of icons with their descriptions, see

Appendix E,

Symbols

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 21 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: