manualshive.com logo in svg

Siemens CLINITEK Status+, Operator'S Manual, Page: 48 / 172

Share
Download
Siemens CLINITEK Status+ Operator'S Manual Download Page 48

48

CLINITEK  Analyzer Operator’s Guide

Op

er

at

ions

Note  

If you set up the analyzer to print the test results 

automatically, the 

Printing

 screen displays until the printout 

finishes. If you set up the analyzer with a connection to a PC, the 
analyzer sends the test results to the PC.

The Clinitest hCG test results are either negative, positive, or 
borderline. The analyzer takes approximately 5 minutes to confirm 
a negative result. If the result is a clear positive, the analyzer 
reports it sooner. If the result is borderline, then you should retest 
with a new sample in 48 to 72 hours. For complete instructions on 
test results, see the Clinitest hCG cassette test instructions for use 
insert.

For instructions on how to set up the analyzer so that you can print 
the results automatically or send the results to a computer, see 
Section 7, 

System Configuration

, 

Changing the Connectivity 

Settings

‚ page 110.

Viewing the Cassette Full Test Results

The test results display on the 

Results

 screen. Select 

Done

 to return to 

the main 

Results

 screen.

Printing the Cassette Full Test Results

Print the cassette Full Test results manually or automatically, or send 
the results to a computer.

To print the cassette Full Test results manually, select 

Print

.

The test results printout includes the following information:

•

Patient name and Patient ID

•

Lot number, if configured

•

Lot expiration date, if configured

•

Test date

•

Test time

•

Operator

•

Test number

•

Results

Summary of Contents for CLINITEK Status+













































































































































































Reviews:

No comments