manualshive.com logo in svg

Siemens CLINITEK Status+, Operator'S Manual, Page: 8 / 172

Share
Download
Siemens CLINITEK Status+ Operator'S Manual Download Page 8

8

CLINITEK  Analyzer Operator’s Guide 

Introduction

Multistix PRO

®

 urinalysis strips are ready to use upon removal from the 

bottle and the entire strip is disposable. The strips may be read visually, 
requiring no additional laboratory equipment for testing.

The strips can also be read on an instrument, using the 
CLINITEK

®

family of Urine Chemistry Analyzers and the appropriate 

software; Multistix PRO 11 Reagent Strips are for use on the 
CLINITEK 500 and CLINITEK Advantus

®

 Analyzers only. The 

CLINITEK Status systems, CLINITEK 50 and CLINITEK 100 instruments 
automatically identify the strip being tested, using the ID bands near 
the handle of the strip. Contact your product representative for further 
information.

Multistix PRO urinalysis strips are for 

in vitro

 diagnostic use. They have 

been determined to be nonhazardous under the guidelines issued by 
OSHA in 29 CFR 1910.1200(d).

Getting Started

This section provides information about how to unpack and install your 
CLINITEK  analyzer.

Unpacking the Clinitek  Analyzer

The CLINITEK  analyzer is delivered in 1 carton.

To unpack your CLINITEK  analyzer, perform the following 
steps:

1. Carefully remove the contents of the shipping carton.

Note  

Retain the shipping carton and packing materials, which 

offer the best protection against damage if you need to ship the 
analyzer.

2. Inspect the carton and contents for visible signs of damage.

If the analyzer appears damaged, immediately file a complaint 
with the carrier.

3. Remove each wrapping and verify that you have the following 

items (see 

Figure 1-1

):

•

CLINITEK  analyzer

•

Power supply adaptor and AC power cord

Summary of Contents for CLINITEK Status+













































































































































































Reviews:

No comments