Siemens CLINITEK Status+ Operator'S Manual Download Page 108

Page: 108 / 172

108

CLINITEK Analyzer Operator’s Guide

System C

onf

iguration

4. On the

System Settings

screen, perform the following steps:

a. Select the

System Settings

options.

System Settings Option

Description

Screen 1 of 2
Printer

•

Automatic

(default) prints

the results for each test

automatically after you
complete the test.

•

Manual

does not print the

test results automatically.

Select

Print

on the

Results

screen to print the test
results. This option extends
the battery life.

•

Off

the test results do not

print. This option extends the
battery life. You might want
to select the

Off

option, when

the printer runs out of printer
paper, while you send data to
the LIS or host computer, or if
you want to reduce the noise
level in the laboratory.

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 108 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: