CLINITEK Analyzer Operator’s Guide
103
System C
onf
iguration
6. Select
Next
3 times to display the
Input Settings-Confirmation
screen.
7. Select
Done
twice to return to the
Select Ready
screen.
Changing the Date and Time
The date and time display on the
Select Ready
screen in the title bar.
The system includes the date and time with the test results in the
format you specify, on the display and the printout.
To change the date and time, perform the following steps:
1. On the
Select Ready
screen, select
Instrument Set Up
.
2. On the
Choose Settings
screen, select
Date and Time Settings
.
3. On the
Set Date & Time
screen, use the up and down arrows to
adjust the date and time.
4. Select
AM
or
PM
if you want the 12-hour time format.
5. Select
Set
.
6. Select
Done
.
To change the date and time format, perform the following steps:
1. On the
Select Ready
screen, select
Instrument Set Up
.
2. On the
Choose Settings
screen, select
Date and Time Settings
.
3. On the
Set Date & Time
screen, select
Choose Format
.
4. On the
Choose Format
screen, select a date format.
5. Select a time format.
Note
If you select the 24-hour format, the AM and PM selections
are not available.
6. Select
Done
to return to the
Set Date & Time
screen.
The date and time display in the format you selected.
7. Select
Set
to confirm your choices and return to the
Choose
Settings
screen.
8. Select
Done
to return to the
Select Ready
screen.
Summary of Contents for CLINITEK Status+
