Siemens CLINITEK Status+ Operator'S Manual Download Page 106

Page: 106 / 172

106

CLINITEK Analyzer Operator’s Guide

System C

onf

iguration

4. Select the results format options.

5. Select

Next

The

Choose Format 2 of 2

screen displays.

6. Select the results format options.

Results Format Option

Description

Screen 1 of 2
Units Selection

•

Conventional (default)

•

SI (Systéme International)

•

Nordic

Note

Nordic units are available

only in English and Swedish. SI
units are available only in
Chinese. If you set the language
to Chinese, the

Choose Format 1

of 2

screen does not display.

Plus System

•

Enabled

displays the test

results in the Plus System.

Results that you record in the
Plus System use plus (+)
symbols instead of clinical
units, such as mg/dL.

Note

For some languages, the

Normal System and the Plus
System test results are the
same, as shown in

•

Disabled

(default) displays

the test results in the Normal
System, not in the Plus
System.

Results Format Option

Description

Screen 2 of 2

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 106 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: