Siemens CLINITEK Status+ Operator'S Manual Download Page 122

Page: 122 / 172

122

CLINITEK Analyzer Operator’s Guide

System C

onf

iguration

Note

The CLINITEK analyzer configuration settings include

settings that apply when you run an analyzer with a CLINITEK Status
connector.

To restore the default settings, perform the following steps:

1. On the

Select Ready

screen, select

Instrument Set Up

2. On the

Choose Settings

screen, select

Instrument Settings

3. On the

Instrument Settings

screen, select

Restore Default

Settings

4. On the

Restore

screen, scroll up and down to view the default

settings.

5. Select

Restore

to return the system to the settings in the Restore

list.

6. Select

Yes

to confirm your decision.

Note

Select

to maintain the current settings and return to the

Restore

screen.

7. Select

Exit

Updating the Analyzer Software

Periodically, Siemens adds new features and makes improvements to
the CLINITEK analyzer software. These software updates are
available on a memory card that you insert beneath the printer cover.

CAUTION

When the system restores the original settings, the system
deletes all results and patient data.

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 122 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: