Siemens CLINITEK Status+, Operator'S Manual, Page: 96 / 172

96 CLINITEK Analyzer Operator’s Guide
System C
onf
iguration
Full Test
By default, when you run a Full Test, the system prompts you to enter
operator, patient, and sample appearance information.
However, if you need to set the prompt for a Full Test, perform these
steps:
1. On the Select Ready screen, select Instrument Set Up .
2. On the Choose Settings screen, select Operator and Patient
Information .
3. Select Full Test .
4. Select Next .
5. Select Done .
Custom Set Up
You can select any of the following custom settings:
• Operator name
• Alphabetic or numeric keypad priority
• Patient name
• Patient ID
• Bar-code reader
• Patient name or patient ID in the Results list
• Last operator’s name displayed
• Sample appearance
• Custom field for frequently used information, such as Physician
Name
To customize the patient, operator, and sample appearance
information, perform the following steps:
1. On the Select Ready screen, select Instrument Set Up .
2. Select Custom Set Up .
3. Select Next .
The Custom Settings 1 of 5 screen displays.