manualshive.com logo in svg

Sequential PRO 3, User Manual

Share
Download
Sequential PRO 3 User Manual Download Page 7

Arpeggiator   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 54

Arpeggiator “Momentary Sustain” Mode   . . . . . . . . . . . . . . . . . . . . . . . . . . 56

MIDI Note Output from the Arpeggiator  . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Arpeggiator Parameters (Display Menus)   . . . . . . . . . . . . . . . . . . . . . . . . . 58

Clock Parameters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Sequencer   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 60

Normal, Gated, and Trigger Modes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Programming the Sequencer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Recording Phrases/Sequences A,B,C, or D.  . . . . . . . . . . . . . . . . . . . . . . . 63

Sequencing Parameter Changes in Real-Time  . . . . . . . . . . . . . . . . . . . . . 64

Copying a Sequence from One Track to Another . . . . . . . . . . . . . . . . . . . . 65

Copying and Pasting an Entire Sequence  . . . . . . . . . . . . . . . . . . . . . . . . . 65

Muting a Sequence Track. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Creating An Extended Sequence    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Paraphonic Sequencing    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Adding Rests, Ties, and Velocity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Editing Duration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Adding Ratcheting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Editing Other Elements of a Sequence   . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Setting or Changing the Destination of a Track  . . . . . . . . . . . . . . . . . . . . . 74

Recording Additional Sequencer Tracks for Modulation. . . . . . . . . . . . . . . 75

Using Slew  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Turning off the Sequencer’s “Notes” Track   . . . . . . . . . . . . . . . . . . . . . . . . 76

Sequencer Parameters (Front Panel)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Additional Sequencer Parameters (Display Menus). . . . . . . . . . . . . . . . . . 78

Cue Program  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 79

Tuned Feedback   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 80

Feedback Parameters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Master Volume/Program Volume  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 82

Transpose   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 83

Hold   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 83

Glide  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 83

Glide Modes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Summary of Contents for PRO 3









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands