manualshive.com logo in svg

Sequential PRO 3, User Manual

Share
Download
Sequential PRO 3 User Manual Download Page 95

83

Pro 3 User’s Guide

Transpose

Transpose

The 

up

 and 

down

 buttons in the 

transpose

 section transpose the 

keyboard up or down in octaves. The LED indicates the current 

keyboard transposition state. Transposing the keyboard also changes the 

MIDI note numbers of the keys so that MIDI notes sent are also trans-

posed. Transpose settings are global and are not saved with individual 

programs. 

The Transpose controls

Hold

When 

hold

 is on, any notes played will continue to play until 

hold

 is 

turned off. When used in conjunction with the Arpeggiator, notes are 

latched on. If 

hold

 is on and at least one key continuously held down, 

any new notes played are added to the arpeggio.

The Hold button

Glide

Glide causes the pitch of a note to glide up or down from the pitch of 

the previously played note. Glide is turned on and off using the 

glide

 

switch, but the 

rate

 must also be set. If the 

glide

 button is on, but 

rate

 

is 

set to 0, glide has no effect. Glide can be set individually for each oscillator. 

Summary of Contents for PRO 3









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands