Sequential PRO 3, User Manual

Page: 56 / 168

44 Low Frequency Oscillators Sequential
There are many ways to make creative use of the LFOs:
• Route the LFO to the
coarse freq
parameter of the oscillators to create
vibrato (
triangle
wave) or random pitches (
s
&
h
/
random
wave).
• Route the LFO’s triangle wave to the filter’s
cutoff
parameter and use
a medium
freq
and
amount
setting to create a wah-wah effect, or use
a slow
freq
setting and low
amount
setting to create subtle harmonic
movement.
• Route the LFO’s square wave to the amplifier’s
amount
parameter and
use a medium
freq
and
amount
setting to create a tremolo effect.
• Route an LFO to an oscillator’s
shape
parameter to make its timbre
evolve. This can be particularly interesting when using Oscillator 3
wavetables.
• Route the LFO’s triangle wave to the
time
parameter of the stereo delay
and use a slow
freq
and low
amount
setting to create a chorus effect.
Any LFO can be routed to any destination (or multiple destinations) using the
modulation matrix. See page 120 for a list of destinations.
Additional LFO Parameters (Display Menus)
Additional LFO parameters are accessible through the menus in the main
display. To see these menus, adjust any of the controls in
lfo
portion of the
front panel.
TAB 1 - LFO Shape
Triangle
Shape Sync Frequency Amount
LFO Control LFO Dest
Frequency
LFO Shape
6 40
AMOUNT SYNC
Shape: Triangle, Sawtooth, Reverse Sawtooth, Square, Random
—This
button sets the waveshape of the selected LFO.
Frequency:
Sets the frequency of the selected LFO from a slow .022Hz
to a fast 500Hz. This is affected by the
sync
(clock sync) parameter,
when on.