Sequential PRO 3, User Manual

Page: 60 / 168

48 Modulation Sequential
Modulation Parameters (Front Panel)
Source:
Selects a modulation source. The are 34 different modulation
sources. See page 119 for a complete list.
Destination:
Selects a modulation destination. The are 88 different
modulation destinations. See page 120 for a complete list.
Amount
Sets the modulation amount. Modulation can be either positive
or negative.
Additional Mod Matrix Parameters (Display Menu)
Additional mod matrix parameters are accessible through the menus in
the main display. To see these, press the
source
or
destination
button on
the front panel.
Sort Slot:
Arranges the modulation list in order of slot number (1-32)
Sort Source:
Arranges the modulation list by modulation source. LFOs
are grouped together, envelopes are grouped together, and so on.
Sort Dest:
Arranges the modulation list by modulation destination.
Oscillator parameters are grouped together, effects parameters are
grouped together, and so on.
Modulation Examples
Here are several modulation scenarios that illustrate how to use the modula-
tion matrix. The examples provide step-by-step instructions for clarity. Some
of these setups are built into the basic program, which you can recall from
the
global
menu.
To use the Mod wheel to add vibrato:
1. In the
lfo
section, set LFO 1 to
triangle
and set
frequency
to 75. Set
destination
to
osc all freq
. Set
amount
to 0. (You will control the
amount with the Mod wheel.)
2. In the
modulation
section, press the
source
button. Use s
oft
k
nob
1 to
scroll to Mod Slot 1 if it’s not already displayed.