manualshive.com logo in svg

Sequential PRO 3, User Manual

Share
Download
Sequential PRO 3 User Manual Download Page 146

134 Appendix F: MIDI Implementation

Sequential

Appendix F: MIDI Implementation

The Pro 3 receives MIDI data according to the settings you have chosen 

in 

globals

. In addition, there is interaction between some of the program 

parameters that determine the overall response of Pro 3 to MIDI data. 

These are the 

globals

 parameters that affect response to MIDI:

MIDI Channel:

 All, 1…16—

Selects which MIDI channel to send and 

receive data, 1 to 16. All receives on all 16 channels.

MIDI Clock Mode:

 

Sets the Pro 3’s ability to send and receive MIDI 

clock messages:

• 

Off:

 MIDI Clock is neither sent nor received

• 

Master

: MIDI Clock is sent, but not received

• 

Slave

: MIDI Clock is received, but not sent

• 

Slave Thru

: MIDI Clock is received and passed to MIDI Out 

• 

Slave No S/S

 (no start and stop): Receives MIDI Clock but does not 

respond to MIDI Start or Stop command.

When set to 

slave

 or 

slave

 

thru

, if no MIDI clock is present at the selected input, 

the arpeggiator and sequencer will not function.

MIDI Clock Cable In:

 MIDI, USB—

Sets the port, MIDI or USB, by 

which MIDI clock signals are received.

MIDI Clock Cable Out:

 MIDI 1, MIDI 2, USB, MIDI All, ALL—

Sets the 

port, MIDI or USB, by which MIDI clock signals are sent.

MIDI Param Send

: Off, CC, NRPN—

Changes to the values of front panel 

controls are transmitted via MIDI as Continuous Controllers (CC) or 

Non-Registered Parameter Number (NRPN). Transmission of parameters 

can also be turned off.

NRPNs are the preferred method of parameter transmission, since they cover 

the complete range of all parameters, while CCs are limited to a range of 128.

Summary of Contents for PRO 3









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands