Sequential PRO 3, User Manual

Page: 85 / 168

73 Pro 3 User’s Guide Sequencer
Editing Other Elements of a Sequence
You can edit other aspects of a sequence as well, including note values and
per-step modulation amounts for any tracks used to modulate synth param-
eters such as filter cutoff, and so on. This is convenient for fixing mistakes,
modifying a sequence, or adding and refining elements of a sequence.
To use the sequence editor:
1. Press the
sequence
button to select the sequence you want to edit: A,
B,C, or D.
2. To show the desired track in the sequence editor, hold down the
track
sel
button and press the step LED with the same number as the track you
want to edit.
3. Release the
track sel
button. The track appears in the display.
To edit notes:
1. Make sure track 1 (
initnote
) is displayed. Then use Soft Knob 1 (
step
)
to scroll to the step you want to edit.
2. Use Soft Knob 3 (
note
) to change the note (C0 - G10).
3. To re-save the sequence, save the program by pressing the
write
button
twice.
To edit a note’s velocity:
1. Make sure track 1 (
initnote
) is displayed. Then use Soft Knob 1 (
step
)
to scroll to the step you want to edit.
2. Press Soft Button 1 to active the velocity tab, then turn Soft Knob 4
(
vel
) to enter a velocity value, 1-127. Turning the knob fully counter-
clockwise sets the step to
rest
.
3. To re-save the sequence, save the program by pressing the
write
button
twice.
A quick way to edit a step when playback is stopped is to press and hold the step
LED for the desired step. You can then edit any parameter for that step while you’re at that
step location.