manualshive.com logo in svg

Sequential PRO 3, User Manual

Share
Download
Sequential PRO 3 User Manual Download Page 92

80 Tuned Feedback

Sequential

Tuned Feedback

Tuned feedback is a method of processing audio using a delay line with tun-

able feedback. By varying the amount and tuning parameters you can use 

it to create a variety of effects, some subtle, and some industrial-grade nasty, 

especially if you turn on grunge.

AMOUNT

GRUNGE

TUNING

TUNED

FEEDBACK

The Tuned Feedback controls

Using Tuned Feedback to Perform “Karplus-Srong” Synthesis  

You can also use Tuned Feedback as a tone generator. In classic Karplus-

Strong synthesis, a short excitation waveform (white noise) is generated 

and fed back into a delay line. The output of the delay line is fed into the 

filter. The filter characteristics determine the harmonic structure of the 

decaying tone.

To use Tuned Feedback for Karplus-Strong synthesis:

1.  In the Mixer, set all oscillator levels to zero.
2.  Set the destination of Aux Envelope 1 to noise.
3.  Set the amount of Aux Envelope 1 to 127.
4.  Set the aux envelope 1 ADSR values to the following: attack: 0, 

decay: 45, sustain: 0, release: 16.

5.  Set the Feedback amount parameter to 66.

Summary of Contents for PRO 3









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands