Sequential PRO 3, User Manual

Page: 82 / 168

70 Sequencer Sequential
LEDs are off on steps that are rests.
Adding Ties
Ties allow you to increase the duration of a note in a sequence (i.e. the
number of steps that it’s held). You can add ties as you record a sequence
in real time, or you can add them after you’ve finished recording
To add ties in real time as you record:
1. Press the
record
button and play a series of notes.
2. When you reach a step where you want to add a tie, play the note on
the keyboard, then press and hold that step LED/button (the LED will
be red).
3. With that step LED/button still held down, press the step LED/button
where you want the tie to end. That series of steps is now tied and the
note sustain for that duration.
4. Release the buttons.
5. Continue playing notes as desired to complete the sequence.
6. When you’re done, press
play
. Your sequence plays back. To stop play-
back, press
play
again .
Notes
Velocity
Step: A1 Note: C5 Vel: 66 Track 1
C
3
+ +
D
3
F
3
C
3
G
3
F
3
A
3
C
3
G
4
F
4
S
4
C
4
C
5
C
3
The note is tied
on steps 1-3
Velocity Duration Ratchet Seq: A
LEDs are dimmed on steps that are tied.
Envelope setting and the Sequencer’s
duration
parameter may affect how tied
notes sustain.