Sequential PRO 3, User Manual

Page: 35 / 168

23 Pro 3 User’s Guide Mixer
Additional Mixer Parameters (Display Menu)
Additional Mixer parameters are accessible through the menus in the
main display. To see these menus, adjust any control in
mixer
section of
the front panel. The parameters explained below do not appear on the
front panel.
TAB 2 - Ext in
INPUT LEVEL
Input Level In Gate Thresh Input Gain
INPUT GAIN
127 0 0
IN GATE THRESH
Ext In Env Mixer LPF Misc Ext In
Input Gain: 0...127
—Boosts the input level of any signal connected to
the
audio in
connector on the rear panel of the Pro 3. This is useful for
increasing the gain of low-level output devices such as guitars.
In Gate Thresh: 0...127
—Sets the threshold above which external
input signals will trigger the Pro 3’s. Triggering from an external audio
input allows you to drive the Pro 3’s Sequencer steps with guitars, drum
machines and other devices.
TAB 3 - Ext in Env
INPUT ATTACK
Input Attack Input Release
INPUT RELEASE
0 0
Ext In Env Mixer LPF Misc Ext In
Input Attack: 0...15
—Sets the attack speed of the envelope follower. Use
this to fine tune the response of the envelope follower when triggering
the Sequencer from an external device connected to the
audio in
jack on
the rear panel of the Pro 3.
Input Release: 0...127
—Sets the release speed of the envelope follower.
Use this to fine tune the response of the envelope follower when trigger-
ing the Sequencer from an external device connected to the
audio in
jack
on the rear panel of the Pro 3.