Sequential PRO 3, User Manual

Page: 81 / 168

69 Pro 3 User’s Guide Sequencer
5. When you’re done, press
play
. Your sequence plays back. To stop play-
back, press
play
again .
6. To resave the sequence, save the program by pressing the
write
button
twice.
A quick way to add a rest to an already-recorded sequence is to toggle off the
front-panel LED/button for that step. The step/button can be toggled on again if you want.
BPM DIVIDE SWING TAP TEMPO ARPEGGIATOR VALUE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
TRACKS
SLEW SEQ LOCK CUE PGM
TRACK SEL
notes/vel duration ratchet cutoff assign 1 assign 2 assign 3 assign 4 assign 5 assign 6 assign 7 assign 8 CV out 1 CV out 2 CV out 3 CV out 4
A B C D
SEQUENCE RECORD PLAY MODE RESET DIRECTION
fwd
Normal
Gated
Trigger
rev fwd/rev random
An unlit LED
indicates a rest
Unlit LEDs indicate rests (or steps with no notes recorded)
To add rests to an existing sequence using the sequence editor:
1. To show the track in the display, hold down the
track sel
button and
press the step LED with the same number as the track you want to edit
(step 1 = track 1, and so on).
2. Release the
track sel
button. The track appears in the display.
3. On the front panel, toggle off the LEDs for the steps that you want to
rest. (The step can be toggled on again if you want.) The rest appears as
an asterisk (*) in the display.
4. Repeat for any additional steps/rests.
5. To listen to the sequence, press
play
.
Notes
Velocity
Step: A1 Note: C5 Vel: 66 Track 1
C
3
* *
* *
D
3
F
3
C
3
G
3
F
3
A
3
C
3
G
4
F
4
S
4
C
4
C
5
C
3
steps 2-3
have rests
Velocity Duration Ratchet Seq: A