Sequential PRO 3, User Manual

Page: 69 / 168

57 Pro 3 User’s Guide Arpeggiator
MIDI Note Output from the Arpeggiator
The Arpeggiator outputs MIDI note messages. Any notes that you hold
on the keyboard will be arpeggiated according to the current settings of
the Arpeggiator and output over MIDI as MIDI notes. You can use this
feature to drive other MIDI-equipped devices such as synthesizers and
drum machines. To access this feature, use the midi arp notes setting in
the global menu.
To enable MIDI Note output from the Arpeggiator:
1. Press the global button, then turn Soft Knob 1 to select midi arp
notes.
2. Turn Soft Knob 3 to select on.
To control an external MIDI device:
1. Connect the MIDI or USB output of the Pro 3 to the MIDI or USB
input of the external device, depending on which type of connection
the external device requires.
2. On the Pro 3, press the
global
button, then use Soft Knob 1 to select
midi out select
.
3. Use the Soft Knob 3 knob to select midi, or usb, or midi+usb, depend-
ing on how your
Pro 3
and external device are connected.
4. Press the global button again to exit the Global menu.
5. On the external device, set the the MIDI Channel and MIDI Receive
port to match the Pro 3 .
6. Hold down a chord on the Pro 3 or start Sequencer playback. The exter-
nal device should be triggered by the arpeggiated or sequenced notes.