Sequential PRO 3, User Manual

Page: 24 / 168

12 Using Paraphonic Mode Sequential
5. Once you have found a location to overwrite, press the
compare
button
again to turn it off. (Programs can’t be written while in compare mode.)
6. The
write
button is still flashing and ready to save. Press
write
and the
sound is saved.
7. Alternatively, if you want to cancel saving and continue editing, press
the
global
button. Saving is canceled.
You can use the
global
button to set the program that appears when you
power on the Pro 3. Simply use the
bank
and
program
knobs to find the program you
want, then press the
global
button twice. That program is now the default program on
start up.
Using Paraphonic Mode
The Pro 3 was designed primarily as a monophonic instrument. But we
added a 3-voice paraphonic playback mode for extra performance power.
In this mode, the three oscillators can be triggered independently, each
with its own amplifier envelope. (However, the filter and its envelope are
shared between the three oscillators.) This gives you the ability to play
chords of up to 3 notes.
Make sure to select a waveshape for oscillator 3 since it’s possible to set this
oscillator to
off
. Each oscillator is triggered with an envelope set by the VCA shape.
Write
Compare
Global
Play List
CUTOFF
Cutoff Drive Resonance Filter Type
RESONANCE
60 20 60
DRIVE Filter Type
Env Amt Filter Env Amt Filter Misc ADSR
Ladder
Revert
Show
Misc Params
Paraphonic
Press the Paraphonic
button to enable
3-voice paraphonic mode.