Sequential PRO 3, User Manual

Page: 126 / 168

114 Chapter 4: Using the Pro 3 with External Devices Sequential
4. Turn the
sustain
knob on the amplifier envelope to 127.
5. Turn the
sustain
knob on the filter envelope to 127.
6. Press the
source
button in the Modulation section.
7. With Soft Knob 2 (
source
) choose
env follow
as the source.
8. With Soft Knob 4 (
destination
) choose
env vca amt
as the destination.
9. With Soft Knob 1 (
edit mod
) choose a second available mod slot.
10. With Soft Knob 2 (
source
) choose
env follow
as the source.
11. With Soft Knob 4 (
destination
) choose
cutoff
as the destination.
12. Use Soft Knob 3 to adjust the modulation
amount
for both modulation
routings. Try a setting of +120 for the
env vca amount
parameter and a
setting of +90 for the
cutoff
parameter.
13. Play the external audio source.
14. Turn up the
ext audio
knob in the Mixer section of the Pro 3. (If you
need to further boost the signal, adjust
input level
and
input gain
.
When you adjust the
ext audio
knob in the mixer, these controls appear
in the display .
15. Set the
in gate thresh
to 100. You can adjust this later if necessary.
16. As the external audio source continues to play, show the Envelope
Follower’s
attack
and
release
parameters in the display by turning
the
ext audio
knob in the mixer. Try an
attack
setting of 5 and
release
setting of 38.
17. Adjust the front panel filter
cutoff
and
resonance
parameters. Try a
cutoff
setting of 0 and
resonance
setting of 160.
18. Adjust any other parameters such as distortion and delay to tailor the
sound.
Connect an expression pedal to the Pro 3 and route it to filter cutoff in the mod
matrix for more real-time control over the wah effect.