Sequential PRO 3, User Manual

Page: 75 / 168

63 Pro 3 User’s Guide Sequencer
To transpose a sequence up or down during playback:
1. Press the
play
button to hear the sequence.
2. Press a note on the keyboard above or below middle C. The sequence is
transposed to that key. (Middle C plays the sequence as recorded.) For
greater range, use the Transpose Up or Transpose Down buttons.
3. During playback, if you want to restart a sequence from step 1, press
the
reset
button.
To record over an existing note sequence:
1. Press the
record
button.
2. Play different notes on the keyboard. The numbered step LEDs indicate
which step you’re on.
3. When you’re done, press
play
to listen to the new sequence.
4. To resave the sequence, save the program by pressing the
write
button
twice.
Recording Phrases/Sequences A,B,C, or D .
The Pro 3 can record up to four independent phrases/sequences per
program. You can select among these by pressing the A,B,C,or D
sequence
buttons on the front panel. During real-time playback you can
switch between these on the fly. (You can also chain them together for
sequences longer than 16 steps. See “Creating An Extended Sequence”
on page 66 for more details.)
To record Sequence B,C, or D:
1. Press
sequence
button B,C, or D.
2. Press the
record
button and play a sequence of notes on the keyboard.
3. When you’ve finished, press the
play
button to hear your sequence.
As noted above, you can switch between sequences A,B,C, and D on the
fly during playback by simply pressing the button of the sequence you
want to play. You can also chain them together for sequences longer than
16 steps. See “Creating An Extended Sequence” on page 66 for more
details.