manualshive.com logo in svg

Sequential PRO 3, User Manual

Share
Download
Sequential PRO 3 User Manual Download Page 93

81

Pro 3 User’s Guide

Tuned Feedback

6.  Set the Feedback tuning parameter to 12
7.  Set the Filter Envelope’s attack and decay parameters to shape the 

envelope of the generated sound.

8.  Experiment with the Feedback Amount parameter and the ADSR 

parameters of Aux Envelope 1 to shape the harmonic content of the 

generated sound.

Feedback Parameters

Amount

: -127...+127—

Sets the level of feedback. As the amount goes 

up, the feedback will eventually oscillate at the frequency set with the 

tuning parameter. Medium levels of feedback add depth and movement 

to the sound.

Tuning

: 0...48—

Sets the base frequency of the feedback loop. It steps 

in semitones from C0 to C4 (0-48) for a four octave range. The exact 

frequency is influenced by factors such as filter cutoff frequency and the 

number of poles in the filter, which can drive it slightly sharp or flat.  

Grunge

: On, Off—

When on, this enables extreme feedback at higher 

levels. It has no effect at lower levels of feedback.

Summary of Contents for PRO 3









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands