Sequential PRO 3, User Manual

Page: 87 / 168

75 Pro 3 User’s Guide Sequencer
Recording Additional Sequencer Tracks for Modulation
Tracks 4-16 can be freely assigned to any modulation destination. You
can either start the Sequencer running and record the modulation values
in real time by turning parameter knobs (in which case the Sequencer
automatically assigns a track to the edited parameter) or you can input
values step by step with the Sequencer stopped.
Here’s how to sequence filter cutoff modulation step-by-step.
To modulate filter cutoff frequency using Sequencer Track 4:
1. Press and hold the
track sel
button then press Sequencer step LED 4.
(Alternatively, turn Soft Knob 1 (
select track
) to select track 4.)
2. While continuing to hold down the
track select
button, turn Soft Knob
4 (
dest
) to select
cutoff
.
3. Release the
track select
button.
4. Turn Soft Knob 1 to go to the desired step in the sequence
5. Turn Soft Knob 3 (
val
) to set a value.
6. Repeat steps 4 and 5 for each step in the sequence until finished.
7. To listen to the sequence, press
play
.
If the length of track 1 (notes) is longer or shorter than the modulation tracks in a
sequence, you can make all tracks restart to step 1 when track 1 plays step 1 by enabling
sync to track
1 in the
seq params
menu (pres the a
rp
eggiator button to display this menu).