Sequential PRO 3, User Manual

Page: 90 / 168

78 Sequencer Sequential
Divide :
Sets the note value for each Sequencer/Arpeggiator step relative
to the BPM.
divide
works with both internal and external clock sources.
The following table lists the
divide
values.
Display Tempo Timing Division
Half BPM/2 Half note
Quarter BPM Quarter note
8th BPM x 2 Eighth note
8 Trip BPM x 3 Eighth note triplets
16th BPM x 4 Sixteenth note
16th Trip BPM x 6 Sixteenth note triplets
32nd BPM x 8 Thirty-second note
64th BPM x 16 Sixty-fourth note
Swing: 50%…75%—
Adds a variable amount of shuffle-like feel to the
master tempo. The greater the amount, the more obvious the effect.
Additional Sequencer Parameters (Display Menus)
Additional Sequencer parameters are found in the menus in the main
display. To see these, press the
record
button on the front panel.
Play Source Restart Sync to Trk 1 Para Seq
PARA SEQ RESTART
Seq Modes BPM Arp Seq Param
SYNC TO TRK1 PLAY SOURCE
Keyboard On Off
The Sequencer Parameters menu
Play Source: Keyboard, Ext In, CV 1, CV 2, CV3, CV4—
Selects how
the Sequencer is triggered. When set to
keyboard
, pressing a key on the
keyboard control playback. When set to
ext in
, an audio signal connected
to the
audio in
jack on the back of the Pro 3 will control playback. When
set to cv 1, cv2, cv 3,
or
cv 4 , playback is controlled by a control
voltage signal connected to the matching control voltage input jack on
the back of the Pro 3.