Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
82 /
122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
I/O
Possible configuration
Configuration description
DO03÷DO08
None
The input is free, non configured.
Reserved
In the system configuration currently in use, the input
is non-configurable.
Cumulative sig
-
nal
Telecontrol modem
ON
The system modem is ON.
Telecontrol modem
registered
The system modem is OFF.
Blocking
alarms
present
Blocking alarms present..
Non-blocking alarms
present
Non-blocking alarms present.
Alarm siren
Alarm siren active.
AUT station
Station automatic signal enabled.
UPS Network OK
Supply signal from UPS network OK.
UPS Low battery
Low UPS battery signal.
Pump stop float
Pump stop float signal.
Alarm level float
Alarm float signal.
Single signal
Telecontrol modem
ON
The system modem is ON.
Telecontrol modem
registered
The system modem is OFF.
Level Switch L1 / L2
signal
Repetition of the pump stop level float.
Alarms present
Alarms present (blocking or non-blocking).
Alarm siren
Signal for optical/acoustic signal of presence of unac
-
knowledged alarms. When the alarms on the HMI are
reset, the siren is silenced.
Run inverter
Inverter order to run
Tab. 65
Digital !/O configurations
Summary of Contents for S6001
Page 1: ...ORIGINAL INSTRUCTIONS USER MANUAL S6001 Pump controller...
Page 2: ......
