Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
84 /
122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
Press key
or
, if present, to scroll through the list of possible configurations; press the key corresponding to
the desired configuration to select it.
Find below a table with all the possible configurations for each configurable analogue I/O.
I/O
Possible configuration
Configuration description
AI01÷AI04
None
The input is free, non configured.
Reserved
In the system configuration currently in use, the
input is non-configurable.
Feedback from inverter frequency (Hz)
Analogue frequency feedback signal from the
inverter. To be used if the type of inverter is set
to wired.
Level analogue probe (m)
Input from level and measurement probe ex
-
pressed in engineering units m (meters).
Pressure analogue probe (bar)
Input from pressure and measurement probe
expressed in engineering units (bar).
Flow analogue probe (m3/h)
Input from flow and measurement probe ex
-
pressed in engineering units (m3/h).
Pump 1 absorption (A)
Input from transducer measuring current ab
-
sorption of pump 1 in A.
Pump 2 absorption (A)
Input from transducer measuring current ab
-
sorption of pump 2 in A.
Pump 3 absorption (A)
Input from transducer measuring current ab
-
sorption of pump 3 in A.
Pump 4 absorption (A)
Input from transducer measuring current ab
-
sorption of pump 4 in A.
Summary of Contents for S6001
Page 1: ...ORIGINAL INSTRUCTIONS USER MANUAL S6001 Pump controller...
Page 2: ......
