Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
23 /
122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
3
3
INSTALLATION
The installation operations must be carried out EXCLUSIVELY by qualified personnel, in possession of the
necessary technical requirements.
Install all protection devices required by the regulations in force in the country where the product is used.
Install the product in an environment with the environmental conditions stated in
“1.9.3 Environmental
characteristics” on page 21
It is mandatory to use adequate Personal Protective Equipment (PPE) to
perform the installation operations, in particular insulating shoes.
The installation operations must be carried out with the power supply cut-
off.
It is forbidden
to dismantle or modify the product.
1.12 ASSEMBLY
1.12.1 Assembly warnings
Be careful not to drop the system so as not to damage it.
1.12.2 Assembly instructions
1.12.2.1
RTU assembly instructions
To guarantee optimal duration,
it is forbidden
to mount the RTU on appliances that generate
heat.
The installation of the RTU can be performed:
on omega bar IEC EN 60715;
onto the wall;
M
ounting
on
oMega
bar
ieC en 60715
To mount the RTU on omega bar IEC EN 60715
(Fig. 6 on page 24)
carry out the following in the given
order:
1.
fix omega bar IEC EN 60715 (1) su to a smooth surface, using dowels;
1.
position the 2 supports
(2)
as shown;
2.
fix the 2 supports using the 4 star screws
(3)
as shown;
Summary of Contents for S6001
Page 1: ...ORIGINAL INSTRUCTIONS USER MANUAL S6001 Pump controller...
Page 2: ......
