Seneca S6001, User Manual

Page: 33 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
33 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
DIGITAL INPUTS
No. 3 pumps, No. 2 floats
1 +13 V COMMON INPUTS IN1..5
2 IN1 PUMP 1 DIRECT CONTACTOR FEEDBACK
3 IN2 PUMP 1 CIRCUIT BREAKER
4 IN3 PUMP 1 START FLOAT
5 IN4 PUMP 2 DIRECT CONTACTOR FEEDBACK
6 IN5 PUMP 2 CIRCUIT BREAKER
7 +13 V COMMON INPUTS IN6..10
8 IN6 PUMP 2 START FLOAT
9 IN7
PUMP 3 DIRECT CONTACTOR FEEDBACK/ CONFIGUR-
ABLE (*)
10 IN8 PUMP 3 CIRCUIT BREAKER/CONFIGURABLE (**)
11 IN9 PUMP 3 START FLOAT/CONFIGURABLE(**)
12 IN10 CONFIGURABLE
13 +13 V COMMON INPUTS IN11..15
14 IN11 CONFIGURABLE
15 IN12 CONFIGURABLE
16 IN13 CONFIGURABLE
17 IN14 CONFIGURABLE
18 IN15 CONFIGURABLE
Tab. 30 RTU settings for Configurations 3 and 4: Digital inputs
(*) If the configuration provides for 2 pumps “IN7” becomes PUMP STOP FLOAT
(**) If two pumps are configured , “IN8” and “IN9” become freely configurable