Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
24 /
122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
To fix each support, ONLY use the 2 holes (of the 4 holes provided) indicated in
Fig. 6 on page
24
.
3.
hook the RTU to omega bar IEC EN 60715.
Fig. 6 RTU mounting on bar
W
all
Mounting
To mount the RTU onto the wall
(Fig. 7 on page 24)
carry out the following in the given order:
1.
position the RTU on the fixing wall;
4.
mark the wall at the 4 housings
(1)
on the RTU;
5.
make 4 holes
(2)
on the fixing wall, where the previously made marks are;
The maximum diameter of the holes must be 5 mm.
6.
position the RTU on the fixing wall;
7.
fix the RTU with suitable fastening elements (screws or rivets).
Fig. 7 RTU wall mounting
_____(1)
_____(2)
_____(3)
(1)____
____(1)
____(1)
(1)____
Summary of Contents for S6001
Page 1: ...ORIGINAL INSTRUCTIONS USER MANUAL S6001 Pump controller...
Page 2: ......
