Seneca S6001, User Manual

Page: 43 / 122

Doc. MI004620-I
S6001 Pump controller
Rev. 0
www.seneca.it
43 / 122
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION CAN
BE REPRODUCED WITHOUT PREVIOUS AUTHORIZATION.
User Manual
DIGITAL INPUTS
No. 3 pumps, No. 2 floats, No. 1 level probe
1 +13 V COMMON INPUTS IN1..5
2 IN1 PUMP 1 DIRECT CONTACTOR FEEDBACK
3 IN2 PUMP 1 CIRCUIT BREAKER
4 IN3 PUMP 1 START FLOAT
5 IN4 PUMP 2 DIRECT CONTACTOR FEEDBACK
6 IN5 PUMP 2 CIRCUIT BREAKER
7 +13 V COMMON INPUTS IN6..10
8 IN6 PUMP 2 START FLOAT
9 IN7
PUMP 3 DIRECT CONTACTOR FEEDBACK/ CONFIGUR-
ABLE (*)
10 IN8 PUMP 3 CIRCUIT BREAKER/CONFIGURABLE (**)
11 IN9 PUMP 3 START FLOAT/cONFIGURABLE(**)
12 IN10 CONFIGURABLE
13 +13 V COMMON INPUTS IN11..15
14 IN11 CONFIGURABLE
15 IN12 CONFIGURABLE
16 IN13 CONFIGURABLE
17 IN14 CONFIGURABLE
18 IN15 CONFIGURABLE
Tab. 40 RTU settings for Configurations 7 and 8: digital inputs
(*) If the configuration provides for 2 pumps “ IN7 ” becomes PUMP STOP FLOAT
(**) If two pumps are configured , “ IN8 ” and “ IN9 ” become freely configurable
LIFTING FILLING
or LSH3 “start Pump3”
or LSH2 “start Pump2”
or LSH1 “start Pump1”
or LSH0 (STOP)
or LSH0 (STOP)
or LSH1 “start Pump1”
or LSH2 “start Pump2”
or LSH3 “start Pump3”
LT (level probe LT (level probe